Corvette Rear Bumper, One Piece Design, Simulated 2pc, 1974

  • High quality fiberglass Corvette rear, simulated 2 piece bumper
  • Fits the 1974  Corvette
  • Hand laid fiberglass for a stronger, more durable, quality product
  • Direct bolt on
  • Gray gel coat finish is perfect to sand, seal, and paint
  • Minimal prep time
  • Made in the U.S.A

The C-3 Corvette, 1967-1982, the 3rd Generation of Corvettes!  New look, new style, and an Anniversary edition can be found in this series. The 1973-1974 Corvette is designed to make driving a little more fun!

Stinger Fiberglass carries a variety of fiberglass parts for your Corvette!  Whether you are repairing or restoring, check out our line of Corvette parts!

The Corvette bumper for year 1974 is a great OEM part for your classy car! 

The fiberglass Corvette bumper will improve and accentuate your vehicle’s original styling. It has been engineered and made by experienced craftsman who pay close attention to detail. These men and women take pride in the products they build to ensure this sleek, detailed, Corvette part complements your vehicle’s exterior design, giving it that outstanding look every Corvette owner craves.

The hand laid fiberglass bumper is strong and durable. Each Stinger Fiberglass mold has been painstakingly reproduced from the original GM body parts and has heavy reinforcements to ensure consistent quality and a superior fit. They are NOT built using a chopper gun as with cheaper imitations. Hand lamination is used to make every part here at Stinger Fiberglass. The gray gel coat finish is perfect to sand, seal and paint which means minimal prep time.

Conditions out of our control are rough on vehicles, so we use high quality materials to withstand years of exposure to the elements. This Corvette bumper will look great and will add originality, style and attitude to your car! 

At American Sports Car/Stinger Fiberglass Designs we make fiberglass products for the classic car enthusiast and we use superior materials. Whether you are searching for something unique compared to other vehicles, or sticking with the classic factory look, the choice is yours.

 

 

We make everything we sell & sell everything we make

 

 

NOTE:  Fiberglass panels require fitting, trimming, shimming, and special finishing.  Unless you are experienced in working with fiberglass, we recommend using a qualified body shop.

COMBINED CANCER/BIRTH DEFECT: WARNING:  This product can expose you to chemicals including glass wool fibers (INHALEABLE & BIOPERSISTENT) which is known in the State of California to cause cancer and/or birth defects or other reproductive harm.  For more information see www.p65warnings.ca.gov

 

 

 

Corvette Rear Bumper, ZR-1 Style, 1984-1990

  • High quality fiberglass Corvette rear bumper
  • Fits the 1984-1990  Corvette
  • Stylish ZR-1 style
  • Hand laid fiberglass for a stronger, more durable, quality product
  • Direct bolt on
  • Gray gel coat finish is perfect to sand, seal, and paint
  • Minimal prep time
  • Made in the U.S.A

Stinger Fiberglass carries a variety of fiberglass parts for your Corvette!  Whether you are repairing or restoring, check out our line of Corvette parts!

The Corvette ZR-1  bumper for years 1984-1990 is a great OEM part for your classy car! 

The fiberglass Corvette bumper will improve and accentuate your vehicle’s original styling. It has been engineered and made by experienced craftsman who pay close attention to detail. These men and women take pride in the products they build to ensure this sleek, detailed, Corvette part complements your vehicle’s exterior design, giving it that outstanding look every Corvette owner craves.

The hand laid fiberglass bumper is strong and durable. Each Stinger Fiberglass mold has been painstakingly reproduced from the original GM body parts and has heavy reinforcements to ensure consistent quality and a superior fit. They are NOT built using a chopper gun as with cheaper imitations. Hand lamination is used to make every part here at Stinger Fiberglass. The gray gel coat finish is perfect to sand, seal and paint which means minimal prep time.

Conditions out of our control are rough on vehicles, so we use high quality materials to withstand years of exposure to the elements. This Corvette bumper will look great and will add originality, style and attitude to your car! 

At American Sports Car/Stinger Fiberglass Designs we make fiberglass products for the classic car enthusiast and we use superior materials. Whether you are searching for something unique compared to other vehicles, or sticking with the classic factory look, the choice is yours.

 

 

We make everything we sell & sell everything we make

 

 

NOTE:  Fiberglass panels require fitting, trimming, shimming, and special finishing.  Unless you are experienced in working with fiberglass, we recommend using a qualified body shop.

COMBINED CANCER/BIRTH DEFECT: WARNING:  This product can expose you to chemicals including glass wool fibers (INHALEABLE & BIOPERSISTENT) which is known in the State of California to cause cancer and/or birth defects or other reproductive harm.  For more information see www.p65warnings.ca.gov

 

 

 

Corvette Rear Bumper, One Piece Design 1974

  • High quality fiberglass Corvette front bumper
  • Fits the 1974  Corvette
  • Hand laid fiberglass for a stronger, more durable, quality product
  • Direct bolt on
  • Gray gel coat finish is perfect to sand, seal, and paint
  • Minimal prep time
  • Made in the U.S.A

The C-3 Corvette, 1967-1982, the 3rd Generation of Corvettes!  New look, new style, and an Anniversary edition can be found in this series. The 1973-1974 Corvette is designed to make driving a little more fun!

Stinger Fiberglass carries a variety of fiberglass parts for your Corvette!  Whether you are repairing or restoring, check out our line of Corvette parts!

The Corvette bumper for years 1974 is a great OEM part for your classy car! 

The fiberglass Corvette bumper will improve and accentuate your vehicle’s original styling. It has been engineered and made by experienced craftsman who pay close attention to detail. These men and women take pride in the products they build to ensure this sleek, detailed, Corvette part complements your vehicle’s exterior design, giving it that outstanding look every Corvette owner craves.

The hand laid fiberglass bumper is strong and durable. Each Stinger Fiberglass mold has been painstakingly reproduced from the original GM body parts and has heavy reinforcements to ensure consistent quality and a superior fit. They are NOT built using a chopper gun as with cheaper imitations. Hand lamination is used to make every part here at Stinger Fiberglass. The gray gel coat finish is perfect to sand, seal and paint which means minimal prep time.

Conditions out of our control are rough on vehicles, so we use high quality materials to withstand years of exposure to the elements. This Corvette bumper will look great and will add originality, style and attitude to your car! 

At American Sports Car/Stinger Fiberglass Designs we make fiberglass products for the classic car enthusiast and we use superior materials. Whether you are searching for something unique compared to other vehicles, or sticking with the classic factory look, the choice is yours.

 

 

We make everything we sell & sell everything we make

 

 

NOTE:  Fiberglass panels require fitting, trimming, shimming, and special finishing.  Unless you are experienced in working with fiberglass, we recommend using a qualified body shop.

COMBINED CANCER/BIRTH DEFECT: WARNING:  This product can expose you to chemicals including glass wool fibers (INHALEABLE & BIOPERSISTENT) which is known in the State of California to cause cancer and/or birth defects or other reproductive harm.  For more information see www.p65warnings.ca.gov

 

 

 

Corvette Daytona front bumper, 1980-1982

  • Hand laminated fiberglass construction
  • One-piece design; Daytona style
  • for Corvette years 1980, 1981, 1982
  • Smooth gray gel coating, makes prep-work easier and faster
  • Precision Fit – Heavily Reinforced Molds
  • Finest Resins, 3 Layers Of 1.5 Oz Mat, 21 Mils Soft Sanding Gel Coat
  • Proper Reinforcements Provide Long Term Durability
  • Precision Trimming Minimizes Prep
  • Made in the USA

Do it right the first time and insist on only the best fiberglass for your Corvette by Stinger Fiberglass!

The fiberglass Corvette Daytona style bumper will improve and accentuate your vehicle’s original styling. It has been engineered and made by experienced craftsman who pay close attention to detail. These men and women take pride in the products they build to ensure this sleek, detailed, Corvette part complements your vehicle’s exterior design, giving it that outstanding look every Corvette owner craves.

The hand laid fiberglass Daytona style bumper is strong and durable. Each Stinger Fiberglass mold has been painstakingly reproduced from the original GM body parts and has heavy reinforcements to ensure consistent quality and a superior fit. They are NOT built using a chopper gun as with cheaper imitations. Hand lamination is used to make every part here at Stinger Fiberglass. The gray gel coat finish is perfect to sand, seal and paint which means minimal prep time.

Conditions out of our control are rough on vehicles, so we use high quality materials to withstand years of exposure to the elements. This Corvette Daytona style bumper  looks great and will add originality, style and attitude to your car! 

Please see our other Daytona Style items for that complete look!

At American Sports Car/Stinger Fiberglass Designs we make fiberglass products for the classic car enthusiast and we use superior materials. Whether you are searching for something unique compared to other vehicles, or sticking with the classic factory look, the choice is yours.

Ships via freight carrier to your business or residence. Please allow extra time for manufacturing.  Each bumper is built upon order placement.

 

NOTE:  Fiberglass panels require fitting, trimming, shimming, and special finishing.  Unless you are experienced in working with fiberglass, we recommend using a qualified body shop.

 

We make everything we sell & sell everything we make

 

 

COMBINED CANCER/BIRTH DEFECT: WARNING:  This product can expose you to chemicals including glass wool fibers (INHALEABLE & BIOPERSISTENT) which is known in the State of California to cause cancer and/or birth defects or other reproductive harm.  For more information see www.p65warnings.ca.gov

Corvette Front Bumper 1976-1979

  • High quality fiberglass Corvette front bumper
  • Fits the 1976-1979 Corvette
  • Hand laid fiberglass for a stronger, more durable, quality product
  • Ready to be finished with your detailed touch
  • Direct bolt on
  • Gray gel coat finish is perfect to sand, seal, and paint
  • Minimal prep time
  • Made in the U.S.A.

The C-3 Corvette, 1967-1982, the 3rd Generation of Corvettes’!  New look, new style, and an Anniversary edition can be found in this series!  Stinger Fiberglass carries a variety of fiberglass parts for your Corvette!  Whether you are repairing or restoring, check out our line of Corvette parts!

The Corvette bumper for years 1976-1979 is a great OEM part for your classy car!  Our fiberglass replacement bumper will bring the exterior of your car back to life.  The new look of the C-3 Corvette is complete with the ‘molded’ look of the front and rear combined.

The fiberglass Corvette bumper will improve and accentuate your vehicle’s original styling. It has been engineered and made by experienced craftsman who pay close attention to detail. These men and women take pride in the products they build to ensure this sleek, detailed, Corvette part complements your vehicle’s exterior design, giving it that outstanding look every Corvette owner craves.

The hand laid fiberglass bumper is strong and durable. Each Stinger Fiberglass mold has been painstakingly reproduced from the original GM body parts and has heavy reinforcements to ensure consistent quality and a superior fit. They are NOT built using a chopper gun as with cheaper imitations. Hand lamination is used to make every part here at Stinger Fiberglass. The gray gel coat finish is perfect to sand, seal and paint which means minimal prep time.

Conditions out of our control are rough on vehicles, so we use high quality materials to withstand years of exposure to the elements. This Corvette bumper will look great and will add originality, style and attitude to your car! 

At American Sports Car/Stinger Fiberglass Designs we make fiberglass products for the classic car enthusiast and we use superior materials. Whether you are searching for something unique compared to other vehicles, or sticking with the classic factory look, the choice is yours.

 

 

We make everything we sell & sell everything we make!

 

NOTE:  Fiberglass panels require fitting, trimming, shimming, and special finishing.  Unless you are experienced in working with fiberglass, we recommend using a qualified body shop.

COMBINED CANCER/BIRTH DEFECT: WARNING:  This product can expose you to chemicals including glass wool fibers (INHALEABLE & BIOPERSISTENT) which is known in the State of California to cause cancer and/or birth defects or other reproductive harm.  For more information see www.p65warnings.ca.gov

Corvette Front Bumper, Stock Design, 1973-1974

  • High quality fiberglass Corvette front bumper
  • Fits the 1973-1974  Corvette
  • Hand laid fiberglass for a stronger, more durable, quality product
  • Direct bolt on
  • Gray gel coat finish is perfect to sand, seal, and paint
  • Minimal prep time
  • Made in the U.S.A

The C-3 Corvette, 1967-1982, the 3rd Generation of Corvettes!  New look, new style, and an Anniversary edition can be found in this series. The 1973-1974 Corvette is designed to make driving a little more fun!

Stinger Fiberglass carries a variety of fiberglass parts for your Corvette!  Whether you are repairing or restoring, check out our line of Corvette parts!

The Corvette bumper for years 1973-1974 is a great OEM part for your classy car! 

The fiberglass Corvette bumper will improve and accentuate your vehicle’s original styling. It has been engineered and made by experienced craftsman who pay close attention to detail. These men and women take pride in the products they build to ensure this sleek, detailed, Corvette part complements your vehicle’s exterior design, giving it that outstanding look every Corvette owner craves.

The hand laid fiberglass bumper is strong and durable. Each Stinger Fiberglass mold has been painstakingly reproduced from the original GM body parts and has heavy reinforcements to ensure consistent quality and a superior fit. They are NOT built using a chopper gun as with cheaper imitations. Hand lamination is used to make every part here at Stinger Fiberglass. The gray gel coat finish is perfect to sand, seal and paint which means minimal prep time.

Conditions out of our control are rough on vehicles, so we use high quality materials to withstand years of exposure to the elements. This Corvette bumper will look great and will add originality, style and attitude to your car! 

At American Sports Car/Stinger Fiberglass Designs we make fiberglass products for the classic car enthusiast and we use superior materials. Whether you are searching for something unique compared to other vehicles, or sticking with the classic factory look, the choice is yours.

 

 

We make everything we sell & sell everything we make

 

 

 

 

NOTE:  Fiberglass panels require fitting, trimming, shimming, and special finishing.  Unless you are experienced in working with fiberglass, we recommend using a qualified body shop.

COMBINED CANCER/BIRTH DEFECT: WARNING:  This product can expose you to chemicals including glass wool fibers (INHALEABLE & BIOPERSISTENT) which is known in the State of California to cause cancer and/or birth defects or other reproductive harm.  For more information see www.p65warnings.ca.gov

 

 

 

Pontiac Firebird 1970-1972 Front Bumper

1970-1972 Pontiac Trans Am or Firebird Front Bumper is made from an original part which includes all mounting tabs. Unlike other competitor products that do not have the tabs, this part makes it easy to replace your old one. This front bumper will have you finish with a perfect fit! You will have no sagging or tears. Our superior quality really shows in this part.

 

NOTE:  Fiberglass panels require fitting, trimming, shimming, and special finishing.  Unless you are experienced in working with fiberglass, we recommend using a qualified body shop.

Pontiac parts fitment may require additional time and experience.  All parts have been molded from an original; however, the Pontiac’s tend to be a little more difficult.    

COMBINED CANCER/BIRTH DEFECT: WARNING:  This product can expose you to chemicals including glass wool fibers (INHALEABLE & BIOPERSISTENT) which is known in the State of California to cause cancer and/or birth defects or other reproductive harm.  For more information see www.p65warnings.ca.gov

Corvette Front Bumper, Stock Design, 1980-1982

  • High quality fiberglass Corvette parts
  • Fits the 1980-1982
  • Hand laid fiberglass for a stronger, more durable, quality product
  • Finest resins, 3 layers of 1.5 oz mat, 21 mils soft sanding gel coat
  • Proper reinforcements provide long term durability
  • Direct bolt on
  • Gray gel coat finish is perfect to sand, seal, and paint
  • Minimal prep time
  • Made in the U.S.A.

The fiberglass Corvette front bumper will improve and accentuate your vehicle’s original styling. It has been engineered and made by experienced craftsman who pay close attention to detail. These men and women take pride in the products they build to ensure this sleek, detailed, Corvette part complements your vehicle’s exterior design, giving it that outstanding look every Corvette owner craves.

The hand laid fiberglass front bumper is strong and durable. Each Stinger Fiberglass mold has been painstakingly reproduced from the original GM body parts and has heavy reinforcements to ensure consistent quality and a superior fit. They are NOT built using a chopper gun as with cheaper imitations. Hand lamination is used to make every part here at Stinger Fiberglass. The gray gel coat finish is perfect to sand, seal and paint which means minimal prep time.

Conditions out of our control are rough on vehicles, so we use high quality materials to withstand years of exposure to the elements. This Corvette front bumper will look great and will add originality, style and attitude to your car! 

At American Sports Car/Stinger Fiberglass Designs we make fiberglass products for the classic car enthusiast and we use superior materials. Whether you are searching for something unique compared to other vehicles, or sticking with the classic factory look, the choice is yours.

 

 

We make everything we sell & sell everything we make

 

Ships truck freight

 

NOTE:  Fiberglass panels require fitting, trimming, shimming, and special finishing.  Unless you are experienced in working with fiberglass, we recommend using a qualified body shop.

COMBINED CANCER/BIRTH DEFECT: WARNING:  This product can expose you to chemicals including glass wool fibers (INHALEABLE & BIOPERSISTENT) which is known in the State of California to cause cancer and/or birth defects or other reproductive harm.  For more information see www.p65warnings.ca.gov

Camaro Fiberglass Front Bumper, Split Lower Valance 1970-1973

* High quality replacement fiberglass split lower valance
* Fits the 1970, 1971, 1972 & 1973 classic Camaro
* Hand laid fiberglass for a stronger, more durable, quality product
* We use the highest grade materials
* All molds are adapted from the original part
* Gray gel coat finish is perfect to sand, seal and paint
* Minimal prep time
* This fiberglass valance is a direct bolt on factory reproduction
* Made off the original factory tooling
* Provides unbeatable durability
* Ships UPS Oversized Ground
* Made in the U.S.A.

This fiberglass Camaro Front Bumper, Split Lower Valance should enhance and improve your vehicle’s inherent styling characteristics. This front bumper, split lower valance has been engineered with the utmost attention to detail; it complements your vehicle’s exterior design by giving it that outstanding, head-turning look you’ve been striving for.

It fits the 1970, 1971, 1972, and 1973 Camaro keeping the classic look in mind. This fiberglass front bumper, split lower valance is guaranteed to hold its shape and keep the lines true to make your ride stand out! We’ve made it off the original factory tooling and it is a direct factory reproduction which bolts directly to your classic Camaro.

The Camaro Front Bumper, Split Lower Valance is made from lightweight, durable fiberglass which means, it not only provides dependable service withstanding years of exposure to the elements, but also allows you to remove weight giving you a racer’s edge!

At American Sports Car we make fiberglass products for the classic car enthusiast and we use superior materials. Whether you are searching for something unique compared to other vehicles or sticking with the classic factory look the choice is yours.

WE BUILD EVERYTHING WE SELL AND SELL EVERYTHING WE BUILD!
HERE, MADE IN AMERICA means something.

Honestly, you can’t ask for more than a Quality hand built American made part!

 

NOTE:  Fiberglass panels require fitting, trimming, shimming, and special finishing.  Unless you are experienced in working with fiberglass, we recommend using a qualified body shop.

COMBINED CANCER/BIRTH DEFECT: WARNING:  This product can expose you to chemicals including glass wool fibers (INHALEABLE & BIOPERSISTENT) which is known in the State of California to cause cancer and/or birth defects or other reproductive harm.  For more information see www.p65warnings.ca.gov

Corvette Rear Bumper, 1980-1982

 

  • High quality fiberglass
  • Fits the 1980-1982 Corvette
  • Made from an OEM GM part for easy fit and replacement
  • Uses original stock hardware 
  • Will also fit 1974 to 1979 model years for that updated look.
  • Part of the complete line of  Corvette  body parts offered by Stinger Fiberglass
  • Hand laid fiberglass for a stronger, more durable, quality product
  • Ready to be finished with your detailed touch
  • No mounting kit needed like the urethane bumper
  • Gray gel coat finish is perfect to sand, seal, and paint
  • Minimal prep time
  • Made in the U.S.A.

The fiberglass Corvette bunper will improve and accentuate your vehicle’s original styling. It has been engineered and made by experienced craftsman who pay close attention to detail. These men and women take pride in the products they build to ensure this sleek, detailed, Corvette part complements your vehicle’s exterior design, giving it that outstanding look every Corvette owner craves.

The hand laid fiberglass bumper is strong and durable. Each Stinger Fiberglass mold has been painstakingly reproduced from the original GM body parts and has heavy reinforcements to ensure consistent quality and a superior fit. They are NOT built using a chopper gun as with cheaper imitations. Hand lamination is used to make every part here at Stinger Fiberglass. The gray gel coat finish is perfect to sand, seal and paint which means minimal prep time.

Conditions out of our control are rough on vehicles, so we use high quality materials to withstand years of exposure to the elements. This Corvette bumper will look great and will add originality, style and attitude to your car! 

At American Sports Car/Stinger Fiberglass Designs we make fiberglass products for the classic car enthusiast and we use superior materials. Whether you are searching for something unique compared to other vehicles, or sticking with the classic factory look, the choice is yours.

 

 

We make everything we sell & sell everything we make

 

 

 

NOTE:  Fiberglass panels require fitting, trimming, shimming, and special finishing.  Unless you are experienced in working with fiberglass, we recommend using a qualified body shop.

COMBINED CANCER/BIRTH DEFECT: WARNING:  This product can expose you to chemicals including glass wool fibers (INHALEABLE & BIOPERSISTENT) which is known in the State of California to cause cancer and/or birth defects or other reproductive harm.  For more information see www.p65warnings.ca.gov